How to join a panel

Last updated April 02, 2020
Written by Alex Moloney

Panels are used by organisations to arrange vendors into groups. The panels you join can impact the compliance details you are asked to provide, the services you are able to list and the compliance documents you are required to upload.


Tip:  To learn more about panels and how they are used you can read our guide; Introducing panels.

Join a panel

To join a new panel:

  1. Navigate to the Panel Selection page from your application stepper
  2. Locate the panel you wish to join
  3. Click the blue Join button beneath the relevant panel
  4. Click the Save button


Tip:  Organisations set their own requirements for their panels. If you are unsure of your panel registrations it is best to reach out to the organisation directly to discuss.


Warning:  You will not be able to update your panel memberships if the organisation is using unlisted panels, the panel is closed or your account is locked. Please reach out to the organisation directly if you wish to update your panel memberships.

Applying with unlisted panels

When an organisation uses unlisted panels you will still see the Panel Selection page on your application stepper. When you open this page you will be able to view the panel/s that you are currently registered on.

After reviewing your panels click the blue Proceed button to continue.



Note:  If an organisation is using unlisted panels you will not be able to control the panels you are registered against. If you believe you have been registered against the incorrect panel it is best to reach out to the organisation directly before proceeding with your application.

Was this article helpful?